BEST DOWNLOADING SPOT

BEST DOWNLOADING SPOT

Software Mania: The Affiliates code (Free sing up)

Software Mania: The Affiliates code (Free sing up)

How to install craked IPA file on Iphone

You'll probably would like to install any free application and games from App Store. What about the paid application at App Store? You have to buy and purchase your favorite application with your own cost. For iPhone userwho like to install cracked application, here i attached instruction on how to install cracked.ipa file to iPhone as follow. So that's mean, you don't have to buy and purchase any paid application at App Store. In other hand, you can use paid application and games for free. But do it with your own risk.

UPDATED: As You may know apple has released iPhone 3.0 firmware updated, please bear in mind these instruction does not works/not support with iPhone 3.0 firmware.

Step 1: You iPhone should be unlocked/jailbroken in order to install cracked ipa file. You can follow my guide here on how to unlock and jailbreak iPhone for 2.2 firmware. But ifyour iPhone already unlocked and jailbroken you can ignore these step. It's very recommended to upgrade your iPhone to 2.2 firmware because nowadays most of all application where available at App Store is compatible with iPhone 2.2 software update.

Install Mobile Installation Patch via Cydia

Step 2: This step is for mobile installation patch for iPhone 2.2 firmware user. If you are iPhone 2.0/2.0.1/2.0.2/2.1 and 2.2.1 firmware user please proceed to the next step and ignore this step. Launch Cydia. Select “sections” at haptic menu, select “System” category and select “2.2 Mobile Installation Patch” or you can tap “Search” in Cydia and type “2.2 Mobile Installation Patch”.

Cydia

Select “install” button at the right top and confirm it to install. Once completed you will performed back to Cydia.

Step 3: This step is for Mobile Installation Patch for iPhone 2.0/2.0.1/2.0.2/2.1 and 2.2.1 firmware user. If you are iPhone 2.2 firmware user please follow step 2 above and ignore these step. You have to "Add Sources" to you sources in repository for iPhone first in order to install Mobile Installation Patch. At "Add" sections you have to enter this address, http://iphone.org.hk/apt/..If you not clear about this you can check out my post on how to Add Sources via Cydia.

After "Add Sources", just select "Sections" at haptic menu and select "Tweaks". Go to "MobileInstallation Patch", and tap it to install. Select "Install" at the right top and confirm it to install. Once complete, press "home" button and return to SpringBoard.

Step 4: You have to sync and install at least one of the free application (any application) to your iPhone before install any cracked application. Launch your iTunes and go or search for free application and download it. For example, you can download: The Best Free Games via your iTunes. Once download completed, sync your iPhone with USB cable and install Tap Defense to your iPhone.

Step 5: Download any favorite cracked .ipa file application and save it to your PC. You can visit my page here for the list of cracked .ipa files. Once download completed, just "double click" the saved cracked .ipa file icon and it automatically installed to your iTunes. Sync your iPhone with USB cable and install your cracked .ipa file to your iPhone. Enjoy!

Jailbreak iPhone 3.1.3 Firmware with snowbreeze

Follow the simple step by step guide below to jailbreak your iPhone 2G, 3G and iPhone 3GS (old bootrom only) on iPhone firmware 3.1.3 using Sn0wbreeze. This version of Sn0wbreeze is for iPhones only. iPod touch 1G/2G (older non-MC models) can useredsn0w to jailbreak on 3.1.3 firmware. iPod touch 3G is currently not supported. Guides for jailbreaking iPod touch 1G/2G (older non-MC models)

Step 1: Download and install the latest version of iTunes.

Step 2: Now start iTunes and sync your iPhone with your PC so that it backs-up all your important data including settings, apps, music, contacts and photos.

Step 3: Download Sn0wbreeze and the original iPhone OS 3.1.3 for your version of iPhone (download links given below). Move all these files to your desktop.

Step 4: Start Sn0wbreeze and select “Simple Mode”.

Step 5: Sn0wbreeze will now ask you to browse for your .ipsw file. Select the correct 3.1.3 firmware .ipsw file by clicking the “Browse” button. Sn0wbreeze will verify the selected file and then will present you with following screen.

Step 6: Click on "Yes" when Sn0wbreeze asks you “Do you want to activate your iPhone?” for hacktivation. Click on “No” only if you are on an officially supported carrier like AT&T.

Step 7: Sn0wbreeze will now create the custom .ipsw file for your iPhone which will be jailbroken.

Step 8: Now you will have to restore your iPhone to this custom firmware 3.1.3 that you just cooked using Sn0wbreeze for your iPhone. Click on your phone from the sidebar in iTunes and then press and hold left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in the iTunes and then release the “Shift” button.
This will make iTunes prompt you to select the location for your custom firmware 3.1.3. Select that custom .ipsw file and click on “Open”.
Step 9: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 3.1.3 on your iPhone. Your iPhone screen at this point will be showing a progress bar indicating installation progress. After the installation is done, iPhone will restart automatically and you should now have a fully jailbroken iPhone running on firmware 3.1.3.

P.S. I haven’t tried this method on my iPhone 3GS yet. I will personally wait for other success stories before I give mine a try. ONLY TRY IT AT YOUR OWN RISK.

Disclaimer: This guide is for testing & educational purposes only. Follow it on your own risk. I’m not responsible for any loss of important data or malfunctioning of your iPhone.

download iTunes 9.0.3 for Windows and Mac
download the Original iPhone OS 3.1.3 firmware for iPhone
download .NET Framework 3.5 (required to run Sn0wbreeze)
downloadsn0wbreeze 3.1.3 for Windows 

p/s 

 keep yourself updated on all the latest iPhone jailbreaking and unlocking releases.

Jailbreak iPhone 3.1.2 Firmware with blackra1n

Note for iPhone 3G and 3GS: Do NOT upgrade to iPhone 3.1.2 with blackra1n if you want to keep your unlock as doing so will result in upgrade of your baseband which will make it almost impossible for you to unlock.

Step 1: Download and install the latest version of iTunes (download link given below).

Step 2: You will now need to first update/restore to the original iPhone OS firmware 3.1.2 on your iPhone by using the latest version of iTunes. Download link for iPhone Firmware 3.1.2 is given at the end of the post.


Step 3: Download blackra1n for Windows (download link at the end of the post).

Step 4: Start blackra1n app. If you are on Windows 7 or Vista, run the app with “Windows XP Compatibility” mode by enabling it from the “Properties” tab to avoid any errors during the jailbreak process.

Step 5: Click on “make it ra1n”:


Step 6: Let the app do its thing and wait for the phone to automatically reboot.

Step 7: You should now have “blackra1n” in the list of applications on your iPhone. Run “blackra1n”, download Cydia and let it install it.


Image Credit: elmarseillais

Step 8: Finally reboot your iPhone. Voila! You should now have fully jailbroken iPhone or iPod touch running on firmware 3.1.2


download frimware 3.1.2-http://www.redmondpie.com/download-the-new-iphone-os-firmware-3.1.2-aga809/
download blackra1n-http://blackra1n.com/

iPod, iPhone and iPad Firmware Download(free download)

How to restore or update your iPod/iPhone/iPad:

After downloading the desired firmware below, you can shift-click (PC) or option-click (Mac) the Restore or Update buttons in iTunes. A file dialog will open and let you choose the downloaded ipsw-file.

Note: Your browser may change the ipsw-file into a zip-file. In that case, just rename it to end in .ipsw and iTunes will accept it.

By clicking Download, you will be redirected to an Apple Inc. server. The list of available firmwares is automatically updated and always the most recent version.

p/s if link cannot search.use manual click n copy link below.

iphone frimware http://rdsbc.blogspot.com/2009/02/downloads.html